Washing Machine Door Interlock. ZV446E Stock Number: ES548529
Spare part suitable for select models of Indesit, Ariston and Hotpoint washing machines
i just replaced the door interlock but problem not fixed . the door won't lock but the machine thinks the door is locked & it is possible to do a wash with door open. help please Ariston A1436. 1 Answer
-
Chris at eSpares says...
Check the motor brushes as if worn they can give the impression of a faulty door lock.
Door lock light flashes and machine will not start. I had put in a load and initially it started working but when I returned to remove the washing the cycle had been interrupted by a tripped fuse. I fixed this but since then the door lock continues to flash and machine will hot start
-
Chris at eSpares says...
See our video to identify your fault code and find your problem: How to Understand Hoover and Candy Washing Machine Error Codes http://www.espares.co.uk/advice/7/2531/how-to-understand-hoover-and-candy-washing-machine-error-codes
hotpoint few12
-
Chris at eSpares says...
Check the motor brushes as when worn they will give this symptom.
I hear a click to say the door is locked but the light is not coming on and the machine is not working. What could this be please? 1 Answer
-
Chris at eSpares says...
Check the motor brushes are not worn as this will cause the problem.
i've had problems with the main fuse board tripping when when i put my washing machine on but have notice also that i had to bang the door to get it to work before it would start then it would start but then trip the fuse, my question is could the door interlock cause this problem if faulty? and is there anyway of testing the interlock is causing the problem? i have had a look for water leaks that may cause it to short but there is no visible when taking top off and looking from the bottom of machine.
-
Chris at eSpares says...
Having to bang the door before it works suggests a faulty door lock but it may be necessary to replace it to prove. The usual cause of tripping is the heater not the lock.
its an indesit washing machine
-
Chris at eSpares says...
Check the motor brushes first as these may be worn.
The door lock needs replacing,what parts do I need to order.
-
Chris at eSpares says...
In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
New switch and door latch fitted. still the same problem.
-
Chris at eSpares says...
Check the brushes on the motor are not worn out. For information to diagnose your problem see our video: http://www.espares.co.uk/advice/7/1730/how-to-diagnose-washing-machine-motor-problems
The door locked light flashes when machine is switched on. Made sure door is shut properly. I have changed door lock but the problem stil there. Any suggestions 1 Answer
-
Chris at eSpares says...
Check for worn motor brushes as this is a common problem that gives this symptom.
On a Hotpoint Aquarius: the Machine keeps switching off and the" door locked" light flashes. Could this be caused by a faulty door lock which keeps releasing and stopping the programme? 1 Answer
-
Chris at eSpares says...
It is not necessarily a problem caused by the door lock. Check motor brushes first and see what part of the cycle the problem occurs. Check out our diagnosis videos in our advice centre for more information.
Will this part fit my appliance?
Check Now