Washing Machine Door Interlock. ZV446E Stock Number: ES548529
Spare part suitable for select models of Indesit, Ariston and Hotpoint washing machines
The door lock on my Indesit machine doesn't lock, it appears to have come off at the back of the the panel as there's nothing showing there now! 2 Answers
The model is IWE 81281 but there isn't a catch shown for that number (there are no letters after it) How difficult would it be to fit and how much dismantling is needed?
- I have watched this video and it is not the same machine, there is no retaining ring and the interlock does not have external securing screws holding it in place!
-
eSpares Staff at eSpares says...
The door lock is straightforward just watch the video for help www.youtube.com/watch?v=p14EEa4AYGM just copy and paste into your browser.
The door locks when closed and the timer works, but the door locked indicator light doesn't come on, and the cycle won't start. 1 Answer
Hotpoint Aquarius WF 210
-
Chris at eSpares says...
Check the motor brushes are not worn out as this can be a common problem.
my indsit IWB5123 only starts when i open & close the door a couple of time now it won't start at all please help 1 Answer
-
Chris at eSpares says...
Check the motor brushes and if they are OK suspect the lock.
I have a hotpoint HV7F140 the seal inside the door is not as on video it seems to be fixed. 1 Answer
-
Chris at eSpares says...
The seal is fitted to the front panel with a retaining band Stock Number: ES831870. Carefully look around the lip of the seal and you should locate the tension spring, you can then use a small screwdriver to 'catch' the spring and start to pull it over the seal lip to release it.
To operate the washer drier I need to slam the door quite hard . Could the interlock require replacing ?
-
Chris at eSpares says...
Your description suggests the likely cause of your problem to be a fault door lock.
door light flashing on Hoover dyn8164d washing machine I bought new door interlock from yourselves but still have same fault door light flashing I have checked the bushes and these have plenty of life left
-
Chris at eSpares says...
For information to diagnose your problem see our video: How to Understand Hoover and Candy Washing Machine Error Codes: www.espares.co.uk/advice/7/2531
there appears to be no power as no lights are working and the machine will do nothing. I have checked the fuse and socket both of which are ok
-
Chris at eSpares says...
For information to diagnose your problem see our video: How to Diagnose Washing Machine Control and Program Problems www.espares.co.uk/advice/7/1793
Washing machine wouldnt start. Had "door" flashing in LED window changed door interlock from espares still not going and "door" still flashing help!!!!!
-
Chris at eSpares says...
Check the motor brushes and see our video: How to Diagnose Washing Machine Motor Problems www.espares.co.uk/advice/7/1730
i have a hotpoint ultima wmud 962 washing machine, door shuts but cannot open it after wash? would this part be any good please 1 Answer
-
Chris at eSpares says...
The problem may be due to a fault elsewhere but if no lights are flashing replace the lock. If the serial number starts 21016 or before you need Stock Number: ES1635603 If the serial number starts 21017 or after you need Stock Number: ES1665555
I have an indesit IWDC6125 Washer/Dryer. When I try to start the cycle the red LED for the door lock starts flashing and nothing happens. I'd be grateful for any help with this fault. 1 Answer
I have recently replaced the carbon brushes. There are no other flashing lights on the machine.
-
Chris at eSpares says...
If you are sure the motor is OK then try replacing the door lock.
Will this part fit my appliance?
Check Now