K2 - K7 T-Racer Nozzle Kit Stock Number: ES659766
Genuine spare part for select Karcher T-Racers
Do you supply the purple nozzles ? Or correct for my set up ? . I bought a K4 full control Home Pressure Washer supplied with the T350 fitted with green nozzles . The cleaning power is very limited almost disappointing . Thank you
-
Chris at eSpares says...
Under the table there is a link to the other kit stock number ES659766 containing the purple nozzles.
-
Chris at eSpares says...
The yellow nozzles are for the larger machines K6 and K7 that produce a greater flow of water so the nozzle aperture will be slightly larger.
-
Chris at eSpares says...
Please see another kit ES1688794- Pressure Washer T-Racer Nozzle Kit
Also what are the pink and yellow nozzles for???
-
Parminder at eSpares says...
Please refer back to the original user manual supplied with your appliance. The different coloured nozzles refer to the model type that are suitable for. The second lance should secure into the T-Racer by a push and twist method. Please see stock number ES507807 for a video on this.
-
Chris at eSpares says...
We have now added a table describing what nozzle to be used on different model T racer and pressure washer combinations.
I have a K2 pressure washer I took the grey nozzles from the patio washer supplied with the washer and replaced them onto my better patio washer with the swivel head . It is now not doing the job as efficiently are the nozzles a different type 1 Answer
-
Chris at eSpares says...
We do not have information on differences between types of nozzles but as Karcher list these for replacement it is not unreasonable to assume the high pressure water may eventually wear and open up the spray head gaps reducing their concentration and performance.
How do I change the nozzles. I have taken the metal clips off but cannot the yellow nozzles off to replace with the grey ones. 1 Answer
-
Chris at eSpares says...
Try pouring hot water over the nozzles to help them expand or use a releasing oil (WD40) and grip carefully with pliers to twist and start to move before removing.
The unit was working fine yesterday but today it pulses. The pressure washer works fine with all the other attachments including the dirt blaster. Any help please.
-
Chris at eSpares says...
If the machine is pulsing then there is likely to be a blockage that is reducing the water flow. The nozzle kit is the most likely cause of this if the machine works correctly on the spray lances.
-
Chris at eSpares says...
The rotor should turn for several rotations when spun by hand. If the water is jetting out at high pressure but the rotor is not turning it may be binding when under pressure. Check the washers on the rotor are not worn or contaminated.
Hi The bottom bar onT100 that emits water dooes not spin anymore, everything looks ok Any advise appreciated 1 Answer
-
Rory at eSpares says...
Hi Robert, it'll either be the nozzles causing this problem, or the spindle the bar is on. Check the spindle first. If it's ok, and you can spin the bar freely by hand, you'll need to replace the nozzles.