Tumble Dryer Door Catch & Latch Kit Stock Number: ES1063065
Genuine spare part for select Ariston, Creda, Hotpoint and Indesit tumble dryers
Manufactured by Hotpoint
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Tumble Dryer Door Catch and Latch Kit
If a cracked and broken door catch or latch is preventing your door from opening or closing effectively, this genuine tumble dryer door catch and latch kit from Hotpoint will save you loads of money over replacing your complete appliance.
You'll have a fully working tumble dryer in no time again.
Specification:
- Complete door catch with latch
- EMZ door catch
Genuine spare part for select Ariston, Creda, Hotpoint and Indesit tumble dryers
Customer reviewers have recommended that a torx screwdriver is required to fit this catch.
Please Note: For certain models, this part is serial number dependent.
6 Questions and 6 Answers
-
eSpares Staff at eSpares says...
There is a video attached to the part which will show you how to replace the door catch, make sure you take photos of the door and the set up of the catch before you take it apart.
-
Chris at eSpares says...
This is only a 'mechanical' door catch and does not have electrical connections. The dryer may have a 'peg' at the top of the door that passes into the machine to operate the 'door switch'.
Hi I have replaced the broken plastic door catch on my hoover vhv381 but the latch on the main part of the machine is now set in the locked position, meaning it can't close the door. I've tried turning the machine off at mains and forcing the latch open with a screwdriver but no luck. How do I replace the part? Looks like I would access it internally, but I'm no expert. Help!
-
Chris at eSpares says...
The correct part for your dryer is Stock Number: ES669068 Our video http://www.espares.co.uk/advice/9/3106 shows how to remove the front and disconect the lock.
I have a problem with the heater. the light comes on intermittently or not at all when the door is closed is this a problem with the door catch. 1 Answer
The Model is Hotpoint Ultima Electric Condenser TDC 60
-
Chris at eSpares says...
The lock only holds the door closed. The machine is turned on by the operating peg Stock Number: ES493450 at the top centre of the door going through the front panel and pushing the switches behind.
-
Chris at eSpares says...
For information on this repair see our video: How to replace a catch & latch on a Hotpoint dryer http://www.espares.co.uk/advice/9/1285/how-to-replace-a-catch-latch-on-a-hotpoint-dr
Will this part fit my appliance?
Check Now
