Dishwasher Aquastop Hose and Water Valve Stock Number: ES177928
Spare part for select Balay, Dimplex, Gaggenau, Bosch, Neff & Siemens dishwashers
I have cleaned the dishwasher and the top shelf items are not being cleaned, if I add extra water after the filling and rinsing cycles, you can hear the top arm working and the top shelf items are cleaned. What can I do to fix the problem?
-
eSpares Staff at eSpares says...
We have a video to help diagnose the problem www.youtube.com/watch?v=jLyA-7SC9ZY just copy and paste into your browser.
I have a bosch SHV55M03GB dishwasher. It starts to fill somewhat then the tap sign is displayed on the led. What little water that comes in does emptey to waste. Has the water inlet solenoid gone ?
-
eSpares Staff at eSpares says...
It is likely that the valve needs testing to determine if it has failed.
Siemens dishwasher sometimes fill and sometimes doesn't when it doesn't fill gives error code 24 though no blockage. When it fills it then works perfectly 1 Answer
-
Dean at eSpares says...
E24 does normally refer to a blocked filter, please see our video for dishwasher help www.youtube.com/watch?v=jLyA-7SC9ZY and our advice centre for Bosch, Siemens error codes www.espares.co.uk/advice/careandmaintenance/bosch-sms-series-dishwasher-error-fault-codes just copy and paste into your browser.
When I leave my dishwasher for an extended period of time, ie a long weekend, it fills with water without being switched on. Is this likely to be an issue with the inlet solenoid valve? 1 Answer
The dishwasher is 11 years old and is a Siemens SE26T551GB/07. Is the inlet solenoid valve just in the Aquastop valve?
-
Dean at eSpares says...
Test the plumbing as if it's filling when off it may be due to backfilling, check if its dirty water as this will confirm it before suspecting the valve.
During the fill this valve opens and closes continuously as a result the dishwasher only partially fills.could this valve be faulty? 1 Answer
If I put water in the dishwasher during its fill it washers so it is functioning correctly.
-
Chris at eSpares says...
The fault you describe is often caused by grease build up in the hose filling the sump causing the water to back up triggering an overfill signal. Try using a cleaner like Stock Number ES1566874 a time or two before suspecting a 'fault'.
I have a neff dishwasher when I press the button to start it does not work but the lights are on could it be the water valve 1 Answer
-
Chris at eSpares says...
For information on this problem see our diagnosis video How to Diagnose control and programme problems with a dishwasher : www.espares.co.uk/advice/3/1985
Siemens D/washer SE26T551GB/04, For 5 plus years there has been a constant banging towards the rear of m/c. It is occurs throughout the water in part of the cycle and I have checked the spray arms rotate freely. Could the AQUASTOP be at fault? 1 Answer
-
Chris at eSpares says...
Carefully pull the machine out and run a test cycle. It is likely the banging is caused by the hoses or external plumbing moving when the water is stopped by the machine and adjusting the pipework will likely cure this.
Hi i have bought a second hand bosch dishwasher with a aquastop hose on the water inlet which has been cut off so i am left with a cut twin core cable and hose. Does this have to be installed or can i install an ordinary fill hose and bypass this device as it is very expensive.
-
Chris at eSpares says...
The reason why Aquastop hoses are so expensive is they actually move the inlet valve to the tap and not the machine end. If the hose freezes and splits it does not flood as the valve is switched off. You do not have a inlet valve on your machine so require a Aquastop hose to control the water into the machine.
Will this part fit my appliance?
Check Now