Fan Oven Heating Element - 2000W Stock Number: ES546769
Spare part suitable for select models of Hotpoint, Indesit, Ariston, Creda and Cannon cookers
Manufactured by Hotpoint
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Fan Oven Element - 2000W
The function of the fan oven element is to heat the oven cavity. When the cooker knob is turned on for your electric cooker, electricity will flow to the element which then proceeds to heat up. Once the element reaches the desired temperature, the electricity flow switches on and off to maintain the temperature.
If the internal element filament burns out, this can cause the element to short circuit - and will lead it to fail. Potential signs that the element has blown can be visual things, such as a split, bulge, or blow hole on the element.
eSpares has the replacement fan oven element, that could soon be yours, to help get your fan oven back to the required temperature - so you can continue to make your delicious meals!
Specification:
- 2 Turn
- Wattage: 2000W
- Voltage: 240V
- Length: 210mm
- Width: 180mm
- Bracket: 70mm
- Tags: 25mm
Spare part suitable for select models of Hotpoint, Indesit, Ariston, Creda and Cannon cookers.
Please check the suitable model fit list to ensure that this is the correct part for your appliance.
9 Questions and 7 Answers
Bought a replacement element fitted it and the oven does now heat up however it doesn’t seem to be getting a very high temperature
-
eSpares Staff at eSpares says...
You need to check if the thermostat is cycling the temperature which brings the element on and off, the only other way is to do a temperature test inside the oven.
Fan oven not heating, fan and light work, just no heat - will it be my element need replacing? 1 Answer
I have double oven, top oven works but main fan oven, light comes on , fan goes round but no heat- I’m guessing the element will have gone ( my initial thought until I looked on here and people are talking about thermostats!) and help would be much appreciated.
-
eSpares Staff at eSpares says...
It is likely the element has failed but you can test it with a multimeter to make sure.
replaced element but still nothing
-
Chris at eSpares says...
For information on your repair see our video: How to diagnose problems with your oven http://www.espares.co.uk/advice/1/2145
When l switch my oven on l have to give the fan a tap in order to start working, then after an hour or so the oven cuts out and l have to wait about 10 mins for it to start working again. Any ideas??? 1 Answer
-
Chris at eSpares says...
The fan motor is likely to be binding and not circulating the air correctly. Replacing it will improve if not eliminate the second problem completely.
The element and fan have started working intermittently, If I leave it turned on after a while they will start to work then they stop again. DO you think a new element will sort it or will I need a fan as well or is it something different.
-
Chris at eSpares says...
If on switch on the element starts heating and the fan struggles to turn the problem is likely to be the fan motor and this can cause the element to overheat and fail. Replace the fan motor as soon as possible if this is the case.
Will this part fit my appliance?
Check Now
