Tumble Dryer Poly-Vee Drive Belt - 1975H7 Stock Number: ES501196
Genuine spare part for select models of Privileg, Zanussi and AEG tumble dryers
Manufactured by Privileg
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Tumble Dryer Poly-Vee Drive Belt - 1975H7
If you have a belt in your tumble dryer that has worn, stretched out even snapped, it will not be able to spin the drum in your machine - meaning your clothes could be left damp at the end of the cycle. eSpares has this replacement belt, which could be the answer to getting the drive system back up to speed in your tumble dryer.
The Poly-Vee belt (ribbed belt) looks like a flat belt but has V-shaped ribs along the inside for better friction between the drive system and the belt. eSpares could soon get you back to nice dry clothes again, with your tumble dryer performing at its best, in no time!
Specification:
- Type: Poly-Vee
- Length: 1975mm
- Type of ribs: H
- Number of ribs: 7
Genuine spare part for select models of Privileg, Zanussi and AEG tumble dryers.
Please check the list of suitable models to ensure that this spare part will fit your appliance.
Please note: This spare is PNC number dependent. Please contact our Call Centre with the PNC/Product number from the data plate of your appliance so we can make sure this spare is suitable.
7 Questions and 7 Answers
i am trying to fit a belt model tc7103s belt type 1975H7 i have adjusted the tension wheel as much as i can and the belt is still too big for the drum has anyone else experienced this if so did you come up with a solution?
-
Chris at eSpares says...
On this model a spring pulls the motor to apply tension to the belt. Take the spring off and return the motor fully round away from the spring to fit the belt on the correct side of the pulley. When the spring is refitted it will move the motor and tension the pulley.
Belts round the drum but where does it go on the wheels ?
-
Chris at eSpares says...
The hinges should be easy enough to replace. First lock the hinges and remove the door from the cooker, Then split the door by removing the front from the back and you will then be able to access the hinges to replace them.
Hi I have just tried to fit a drive belt to my tumble drier but it is to big and I see no way of adjusting it could you please help. 1 Answer
Tricity Bendix,model MT320W belt order number 2814116
- You may be able to alter the position of the tension wheel spring. I had to do this to take up the slack, bit fiddely but worked fine Paul
Can you help me to fit a dryer belt on a zanussi dryer
-
eSparesMalindi at eSpares says...
Unfortunately we cannot provide fitting instructions for this spare. Please contact an engineer for support with this part.
-
eSparesToby at eSpares says...
Take a look through our advice centre, most common problems for tumble dryers are listed and explained on there.
Will this part fit my appliance?
Check Now
