Tumble Dryer Poly-Vee Drive Belt - 1975H6 Stock Number: ES501196
Genuine spare part for select models of Privileg, Zanussi and AEG tumble dryers
i am trying to fit a belt model tc7103s belt type 1975H7 i have adjusted the tension wheel as much as i can and the belt is still too big for the drum has anyone else experienced this if so did you come up with a solution?
-
Chris at eSpares says...
On this model a spring pulls the motor to apply tension to the belt. Take the spring off and return the motor fully round away from the spring to fit the belt on the correct side of the pulley. When the spring is refitted it will move the motor and tension the pulley.
Belts round the drum but where does it go on the wheels ?
-
Chris at eSpares says...
The hinges should be easy enough to replace. First lock the hinges and remove the door from the cooker, Then split the door by removing the front from the back and you will then be able to access the hinges to replace them.
Hi I have just tried to fit a drive belt to my tumble drier but it is to big and I see no way of adjusting it could you please help. 1 Answer
Tricity Bendix,model MT320W belt order number 2814116
- You may be able to alter the position of the tension wheel spring. I had to do this to take up the slack, bit fiddely but worked fine Paul
Can you help me to fit a dryer belt on a zanussi dryer
-
eSparesMalindi at eSpares says...
Unfortunately we cannot provide fitting instructions for this spare. Please contact an engineer for support with this part.
-
eSparesToby at eSpares says...
Take a look through our advice centre, most common problems for tumble dryers are listed and explained on there.
ordered new belt for zanussi tumble dryer can you tell me please how to take up the slack tc7102w
-
Rory at eSpares says...
Hi Belladog, the belt must be fitted round both the drum and the clamping roller, which can be found here: http://www.espares.co.uk/part/tumble-dryers/electrolux/p/1088/15/0/0/629342/clamping-roller-assembly.html
-
Rory at eSpares says...
Hi Sharonkee We tend not to use dimensions as an indicator of whether a part like a drive belt will fit. What we encourage you to do is come back to us with the specific model number of your tumble dryer and we will be happy to find the right belt for you. For help finding your model number, use our handy guide: http://www.espares.co.uk/findingmodelnumbers.aspx Currently, we do not have the facilities to ship overseas, however, if you have any friends or family in the UK we will happily send it to them, then maybe they could send it on for you!
Will this part fit my appliance?
Check Now