Washing Machine Cold Water Double Inlet Solenoid Valve Stock Number: ES1249572
Replacement spare part for select models of Beko washing machines
Manufactured by Original Quality Component
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Washing Machine Cold Water Double Inlet Solenoid Valve
If you’re finding water from your household supply is not filling into your washing machine, it could be time to replace the solenoid valve.
The solenoid valve is an electrical component that opens when current is applied to it and allows the machine to fill with water. With this replacement we could help get your appliance back in full working order.
Specification:
- Angle: 180°
- Type: 2 Way
- Connector: Tag
- Voltage: 220V-240V
- Bore: 12mm
- Cold Water Inlet
Genuine spare part for select models of Beko washing machines.
Prior to ordering please see the list of appliances to ensure compatibility with your appliance.
8 Questions and 6 Answers
Water is going in and the drum is turning but after 3 or 4 minutes the IE error code comes up. All pipes are clear and water is going in easily. Everything else seems to be working including the spin.
-
eSpares Staff at eSpares says...
have a look at our diagnosing video for help www.youtube.com/watch?v=QYPqpjLV7s4&t just copy and paste into your browser.
WM7335w is not filling up with water, checked pipes all ok, did diagnostics in test mode and water does go through the soap dispenser. could it still be the inlet solenoid? 1 Answer
-
Chris at eSpares says...
Enter 'Diagnose filling problems washing machines' in our advice centre for information on your problem.
when start washer it makes a humming sound an will not fill cleaned filter an checked pipes an still wont fill please help im lost without my washing machine
-
Chris at eSpares says...
For information to diagnose your problem see our video: How to diagnose washing machine dispenser and filling problems http://www.espares.co.uk/advice/7/1825/
the dispenser looks fine
-
Chris at eSpares says...
If water is dispensed into the pre wash and main wash compartments there is not likely to be a fault with this valve. If the softener is not being flushed into the machine replace the dispenser top.
BEKO WMB61221S
-
Chris at eSpares says...
Check the dispenser top for mould as this is the usual cause. To check the valve select final rinse and partially open the draw. If water flows into more than one compartment then the valve is likely to be ok. Note your machine may perform two rinses and this will only occur on the final rinse.
Will this part fit my appliance?
Check Now
