Dyson Vacuum Cleaner On/Off Switch Stock Number: ES966544
Genuine spare part for select models of Dyson vacuum cleaners
Is the on/off switch on a Dyson DC25 the same as the switch to start and stop the brushes on the brush bar? 3 Answers
- Sorry to disagree with the previous reply to this question but on my DC25 there is a red switch cover which operates the vacuum and next to this is a grey switch cover which engages the rotation of the brush bar. This allows the cleaner to be used on hard floors. The two switches look the same on the You-tube video. Are they the same? Both are on-off switches.
- Yes but there is also a switch for the brush bar next to the on/off switch on my DC25........so are they the same replacement part??
-
eSpares Staff at eSpares says...
This item switches the whole vacuum on including the brush bar, there is only 1 on/off switch on a DC25.
my vacuum will not switch on I need to check the switch but can not access it and don't want to break it
-
Chris at eSpares says...
The original Dyson switch was discontinued but Stock Number: ES1562801 should be suitable, you may have to carefully bend the connections.
- this micro switch only has 2 pins my dc04 has 4
-
Chris at eSpares says...
We have a video attached to the part of this repair in a similar model. We do not have any further information on this repair.
-
eSpares Staff at eSpares says...
You need to open the cover for the pre-motor filter, use a flat blade to prise the cover off and both the wheels and take out the screws underneath on both sides and one where the pre-motor filter was and the casing will come off revealing the switch.
All of the instructions & videos that I can find appear to relate to the upright models - are there instructions available on how to access the switch on the ball type Dysons?
-
eSpares Staff at eSpares says...
We do not currently have a video showing the switch replacement on this model, there are screws located into the ball that has to be removed to gain access to the switch.
-
Dean at eSpares says...
There are 5 torx head screws holding the cover on, please see this video that shows the dismantle procedure www.youtube.com/watch?v=qdwHdHCNjMo&t=71s just copy and paste into your browser.
Trying to remove on.off switch on DC04absolute. It keeps showing video of DC07 which as a central switch unlike mine which is to the side and no visible screw unlike the car switch option 1 Answer
Also as the video does.t match will the switch be the same? Thanks again
-
Chris at eSpares says...
We do not have access to this machine but looking at Stock Number: ES914872 it appears there may be a 'hidden' screw that hold this assembly in position. Remove this and the switch and housing should prise out.
-
Chris at eSpares says...
We are sorry but do not have any additional information other than the video attached.
I have a DC 25 vacuum cleaner,about 14 month old and the on/off switch will not stay on.Trying to take the cover off is difficult,I have taken 1 screw at the front out and 2 at the rear but still cannot get the cover off to renew switch.The video does not show how hard it is,,Please help
-
Chris at eSpares says...
We do not have any information other than an exploded diagram showing what parts are used on the 'Duct assembly' This does not give any further details, the cover on the attached video has in addition to the screws plastic 'claws' that hold it in place either side of the top that can be seen in the video. You have to pull the cover off these claws, try pushing to one side then the other to help this.
I have a Dyson DC25 Animal which has two switches one main & one for motor on brush head, the switch for the brush head does not work what part do I need as I have already purchased a new brush head from you thinking that the motor had broken 1 Answer
-
Chris at eSpares says...
For information on a similar repair see our video. http://www.espares.co.uk/advice/4/1363/how-to-replace-a-dyson-switch-and-actuator-dc
Will this part fit my appliance?
Check Now