Washing Machine Drum Paddle Stock Number: ES1086638
Genuine spare part for select Hoover, Candy, Stoves and Baumatic washing machines
- How do you fit this product
-
Chris at eSpares says...
Hoover paddles are usually held by clips and one stainless steal screw that can be accessed by removing the sump hose. Use blue tac to hold the screw on the tip of the driver.
-
Chris at eSpares says...
We believe this will usually stay in place held by the spring clip if the screws are not refitted.
can you show me how to replace this paddle, cant find any instructions
-
Parminder at eSpares says...
Please view our advice centre page which will give you more information on this matter, http://www.espares.co.uk/advice/7/1528 The model in this video may be different to yours, however the process should be similar for other makes and models.
the paddle has come off and broken leaving a screw exposed will the new paddle have to be screwed in place or will it be secure enough just slid into place
-
Chris at eSpares says...
The paddle may slide and click into place but if the manufacturers have fitted a screw it is likely to be more secure if this is refitted. You may be able to fit the screw by removing the sump hose of the drum. Take care not to loose the screw as it will not be magnetic so to stick on the screwdriver tip try candle wax or Blu tack.
I have a Hoover dynd the paddle lifter does not slide off is there a screw in it and is it easy to get to 1 Answer
The web all say it's easy and the videos all show it slides but none show the type I have for DNY7164D1X
-
Chris at eSpares says...
To access the screw you may have to lower onto one side and remove the sump hose. It is fairly difficult even for an engineer.
-
Chris at eSpares says...
If the paddles do not just slide and lock in place we think on your machine the paddles slide into place and are secured using a stainless steal screw from under the tub. To access and remove the screw you may have to lay the machine on its side and remove the hose from the bottom of the tub. As the screw is not magnetic you can use 'blue tack' to hold it onto the screwdriver tip. This is a difficult repair and you may consider it best to contact an engineer to carry it out for you.
I have looked but can only find a video on how to change a hotpoint paddle. I have a candy washing machine and the paddles are different. Many thanks
-
Joshua at eSpares says...
Just visit the 'Washing Machine Advice' section of our Advice Centre - our video on changing the paddle in an LG machine may help!
I have the new paddles for my candy washing machine but I am struggling to fit them. I have tried watching the video online but to no avail. Does fitting require me to take off the back and do i need to use fitting screws for my particlar model. 1 Answer
`````````MOD. GOF 662-80
-
Chris at eSpares says...
The drum assembly is supplied as one piece in this machine but the paddles are replaceable. From memory I think there is one maybe two stainless steel screws per paddle that need to be removed before you can slide the paddle and release it from its grooves. You may be able to reach these screws by lying the machine down and removing the sump hose.
Will this part fit my appliance?
Check Now