Washing Machine Dispenser to Tub Hose Stock Number: ES828659
Genuine spare part for select Ariston, Indesit and Hotpoint washing machines
Manufactured by Indesit
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Washing Machine Dispenser to Tub Hose
If you have encountered the problem of a blocked dispenser hose you will soon notice that using the washing machine could be very hard to do! But once this replacement from eSpares has been fitted you will be able to get the clothes washed with no further problems! This clever little hose is made to fit between the detergent dispenser drawer housing and the washing tub.
This hose is a Genuine spare part for select Ariston, Indesit and Hotpoint washing machines. Please view the model fit list before purchase to ensure the spare is suitable.
4 Questions and 4 Answers
My filler hose is leaking at point of entry to drum, confirmed. Removed all looks good but was v. Grimy. Any silicone or silicone grease to apply before refitting old? 1 Answer
I notice there is movement between drum when moved and seal edge I suppose there is supposed to be movement. Rubber is still flexi.
-
Chris at eSpares says...
Most of these type of hoses just 'push in' there should be no need for glue or sealant if not used during manufacture.
Just wondered if JH could elaborate on the design fault he has mentioned above, as the hose looks ok (no holes or air escaping) but there is a leak somewhere by this hose (maybe where it joins to the dispenser drawer) because it is water stained?
-
Chris at eSpares says...
The only 'issue' you are likely to have in our opinion is the rubber loop that holds the hose can break if the tub moves excessively on spinning with an out of balanced load.
Got a smallish leak under the machine about 8 inches ( 20 cms) in on the left hand side. Tube from dispenser to drum looks ok Door seal is dirty but looks ok. Any ideas / options? Cheers, B
-
Chris at eSpares says...
For information to diagnose your problem see our video: How to diagnose washing machine dispenser and filling problems www.espares.co.uk/advice/7/1825
does this hose come with a new clip and also how do you release this clip at the dispenser end of the hose. I have a leak coming from top end of this hose but not sure if the hose or clip is at fault. Not sure how to release this clip without breaking it. thanks
-
Chris at eSpares says...
The hose clip is likely to come seperately and is removed by using a large pair of pliers to close the clip 'ears' together expanding the clips diameter. Before you blame the hose or clip the usual reason for leaking in this area is due to mould or limescale build up in the dispenser jets causing water to be deflected over the draw and down the front of the machine on final rinse.
Will this part fit my appliance?
Check Now
