Washing Machine Module Board Stock Number: ES488030
Genuine spare part for select Ariston, Creda, Hotpoint, Indesit and New World washing machines
Manufactured by Indesit
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Washing Machine PCB Module
If your washing machine is displaying faulty codes or generally misbehaving, then you may have an issue with your power module. Don't let a faulty PCB pile up the washing, as we have just the spares you need to fix the problem. This genuine spare control power module from eSpares, will bring your washer back to its best.
Note: Please note that this module does not come with a programmed eeprom chip.
This is a genuine spare part for select Ariston, Creda, Hotpoint, Indesit and New World washing machines.
Please check the list of suitable models to ensure that this spare part will fit your appliance.
This is Indesit spares reference: C00143471
4 Questions and 3 Answers
I am in need of your indesit washine machine module es4 88030.It states that it does not come with a programmed eeprom chip.What is this, is it required, what is its purpose and if I did need it do you have it and what does it cost.Regards Ralph
-
Chris at eSpares says...
The eeprom is a memory chip that contains the wash programme information and without it the machine will not work at all. This module after replacement has to be programmed using a smart card and card reader. for more details see our video: http://www.espares.co.uk/advice/7/1793/how-to-diagnose-washing-machine-control-and-program-problems
hello, washing machine you select number four and dial just goes round and back to number four. you put it on number eight and it just stays there. I thought it may have been programmer put new and just the same. can you help, please. regards dave jolliffe.
-
Chris at eSpares says...
This module comes without an eeprom and it is neccersary to transfer this from the original module. Locate the eeprom in its socket and using a small screwdriver gently prise out from the socket noting the direction of the indicator mark on the ic. Trying not to touch the pins push back into the new board and retry the machine.
Our Indesit W143SUK is spinning at excessive spins out of control. The machine performs Ok in every other respect. Would I be right by replacing the module it would correct this problem??
-
Rory at eSpares says...
Hi Orwell, check out this advice article for help: http://www.espares.co.uk/advice/washing-machines/a/7/30/common-washing-machine-faults.html
I have purchased a Module for the above from you. I then purchased an eeprom from you for the above. I am told I still need to program the board, and can not just install it and it will work. HELP
Will this part fit my appliance?
Check Now
