Washing Machine Dryer Heater Element - 920W Stock Number: ES1078763
Genuine spare part for select models of Zanussi, Electrolux and AEG washing machines
Manufactured by Zanussi
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Washing Machine Dryer Heater Element - 920W
The element in your washing machine will produce the heat in relation to the temperature settings you have selected. If you find that the water is not being heated correctly, it could be due to a faulty element.
If this has happened to your washing machine, eSpares are here to help. We have this replacement element, that could soon be yours to help get you back to a fully functioning washing machine again in no time!
With the help of eSpares, you could soon be able to get your washing machine in full working order, so you can tackle the laundry that has piled up!
Specification:
- Wattage: 1800W
- Voltage: 230V
- Contains NTC Sensor Thermistor
- Single Tag Type
- Earth Tag
- Full length of element: 210mm
- Length of element to bracket: 168mm
- Width of element: 65mm
- Length of element to tubliar bend: 120mm
Genuine spare part for select models of Zanussi, Electrolux and AEG washing machines.
Please check the list of suitable models to ensure that this spare part will fit your appliance.
2 Questions and 2 Answers
What's the ohms reading for this element new? Ive seen your guides say 20-50. Mines reporting dryer element problems but reads 63. Is this too high or inline with a new element of this type. The washer single element only reads 27 ohms.
-
Chris at eSpares says...
We do not have the specific value for this element however as the two parts can be used together you will have a net resistance of just over half the lowest value so probably just over 30 Ohms. So the value you are reading is within the expected range.
I have located where this part sits in my washer dryer ZWD16270W, however I am having difficulty removing the old part (heating element), in order to replace it. Please can you help?
-
Christopher at eSpares says...
It may be necessary to remove the heater 'tunnel' to have greater access when replacing this part. The element itself appears to be slid into the heater tunnel secured by two screws through the mounting plate at the connection end.
Will this part fit my appliance?
Check Now
