Answer this Question (1 Answer)

• If your oven is the built-in microwave/oven there are two plastic screws on the inside of the door that need to be completely unscrewed, then with the door almost closed the outer glass door will lift up and off. Make sure the power is off at the wall. After this it is easier to unscrew the door hinges- one plate on either side on the body of the oven. the black inner metal cover around the broken glass comes off if you remove the plastic latches at the top of the door on the inside, then there are a load of screws around the inner plate that holds the glass that need to be undone. Make sure you remove all the little bits of glass after removing the main glass panel- it sit on a metal mesh- note which way round the mesh goes. I hoovered it all just to make sure all the glass bits were removed. there is a plastic seal the glass sits on- make sure it is in the groove. then just reverse the process- I took a photo of each phase just to check. Good luck! By Anonymous - London - 15 January 2012