if I fit this unit my self to wdr7543121w is it a straight swop over or do you need to any engineers set up codes
Beko washer dryer model wdr7543121w clothes coming out warm wet due to much water being put in and not drained in a drying cycle Checked already the heater element it ok ,cleaned fan and heater box and condenser of lint .None of tocs have tripped tested with meter. Pump checked and sump and drain hoses all clear ,wash cycles all fine just drying cycle seems out of sync ,Water inlet opens and closes to condenser no leak past and I am given to believe that this action should be intermittent on this model to save water any guidance would be appreciated I’ve also considered the linear level switch? No support available from Beko technical infact they were rude and abrupt so I might just cut my losses and junk it when the washer dies So much for saving the environment I had a hotpoint washer dryer for over twenty years their tech girls were only to happy to help and were proud the machine was still going
Answer this Question (1 Answer)
-
eSpares Staff at eSpares says...
On a washer dryer, there is usually a dual inlet valve and it is likely the dryer valve is letting in too much water so check that and make sure the condenser is not blocked.
Washer Dryer Main PCB Stock Number: ES1777863
Genuine spare part for select models of Beko washer dryers
Q&A tips & guidelines
-
Focus on the features or function of the product
-
Write your question in clear English
-
Be polite! Profanity won't be approved
-
Don't include personal info
-
Don't name other websites
-
Don't mention product prices