Our DRVS62W Beko dryer when used on the set programs within a few minutes of starting shows the 'clean filter' light and stops heating. We've removed the sensor cover and cleaned out lots of old lint which has helped resolve the issue slightly with the light staying off a little longer. However it is still doing it when the filter is clean after about 20 mins of being on the programmed settings even when the filter is clean. Does the sensor cover you sell have the sensors i.e. the metal strips included in it? also, there are wires attached with a couple of connectors to the sensor, is it worth changing this as well, and if so, what part is it? The dryer is six years old and is heavily used on a daily basis - it's been brilliant and with new bearings and a belt from e-spares has proved to be a real workhorse - we are loathed to have to replace it if it is just a case of replacing the sensor cover and attached electricals.