Answer this Question (1 Answer)

• remove the top cover of the machine then remove the door.next the front fixing screws.should you experience difficulty in removing these then you will have to go to the back of the machine.firstly it is advisable to have a suction cleaner handy and to clean the back .remove all the fixings to the back cover.next start to remove the back panel and the drum mounting in the centre .remove electrical connections and the back comes off remove the drum and there is the seal.strip out the seal making sure none remains fit the new seal carefully making sure it lies flat in the groove.rebuild in the reverse order. By Anonymous - fylde coast - 12 February 2013