Get The App From Play Store!

Skip to main content

How to replace the door seal on a Miele tumble dryer

If your tumble dryer isn't drying correctly or you are experiencing mould around the door, it could simply be down to a damaged door seal. If the door seal is split or has become worn, air will escape through the door and affect the performance of your tumble dryer or can cause condensation to leak out. In this article, we will show you how to remove the door seal and replace it with a new one.

How do I know if my door seal is faulty?

There are a few tumble dryer issues that are caused by a faulty door seal. Door seals help contain heat so if your dryer isn't heating up or drying clothes correctly, this could mean heat is escaping due to your damaged door seal. Moist air can also exit the machine due to this and cause mould to form around your tumble dryer. Another sign is that lint and fluff are becoming stuck between the door and the glass. If you are experiencing any of these issues and you suspect your door seal could be causing the problem, you will need to replace it.

How to replace the door seal on a Miele tumble dryer step by step

For help with replacing your faulty door seal and getting your dryer back up and running again, watch our how-to video or follow the step by step guide below. You can get your hands on a replacement door seal for your Miele tumble dryer via our online shop.

What you'll need:

 

Safety First!

Before you carry out this repair, be sure to switch off your tumble dryer and fully disconnect it from the mains.

Step 1: Remove the door

To get to the door seal, you will need to remove the door itself. To do this, first, remove the two screws on the door hinge. As well as the screws there is also a hook that keeps the door in place. Remove this and then lift the door off.

Removing The Two Screws On The Door Hinge And Removing The Hook That Keeps The Door In Place

If you're completing the work on the top of your tumble dryer, it's a good idea to place some carpet tile down to protect the top of your appliance and the door itself.

Placing Some Carpet Tile Down To Protect The Top Of The Appliance And The Door Itself

Step 2: Remove the filter

Remove the filter by sliding it out from the door.

Removing The Filter By Sliding It Out From The Tumble Dryer Door

Step 3: Remove the outer door panel

The outer door panel is held in place at the top by tabs that are around the outside. To release the two pieces of the door, you will need to use a flat-headed screwdriver and ease it into the slots to release the tabs.

Releasing The Two Pieces Of The Door Using A Flat Headed Screwdriver To Ease It Into The Slots To Release The Tabs

Once the tabs are released, you can slide the door out of the outer door panel and move it out of the way.

Sliding The Door Out Of The Outer Door Panel And Moving It Out The Way

Step 4: Access the door seal

To access the seal, you will need to unscrew the inner door panel. To do this, you will need to remove the five Torx head screws that are holding it in place.

Removing The Five Torx Head Screws That Are Holding The Inner Door Panel In Place

You can then lift it off and you will be able to see the inner door with the door seal around the outside.

The Inner Door With The Door Seal Around The Outside

Step 5: Remove the door seal

The door seal is easy to remove. All you need to do is lift it out of position.

Lifting The Door Seal Out Of Position

Cleaning Tip:

While you're there and just before you fit the new door seal, it's a good idea to give the door a good clean. All you need to do is wipe it down with a clean cloth.

Wiping The Door Down With A Clean Cloth

Step 6: Fit the new door seal

Now it's time to fit your new door seal. To do this, find the lip in the door seal and fit it all the way around the edge of the door. You may need to stretch it slightly to fit it over when you get to the final edge.

Finding The Lip In The Door Seal And Fitting It All The Way Around The Edge Of The Door

Step 7: Refit the inner door

Reattach the inner door panel and refit the 5 screws.

Reattaching The Inner Door Panel And Refitting The Five Screws

Step 8: Refit the tabs

Then, use your flat-headed screwdriver to refit the tabs at the top of the door.

Using A Flat Headed Screwdriver To Refit The Tabs At The Top Of The Door

Step 9: Replace the filter

Slide the filter back into the door.

Sliding The Filter Back Into The Door

Step 10: Refit the door and hinge

Place the door into position and refit the screws as well as the hook that holds it in place. Once you have done this, test the door to make sure it is opening and closing as it should.

Placing The Door Into Position And Refitting The Screws As Well As The Hook That Holds It In Place

We hope this video has helped you replace the faulty door seal on your tumble dryer and your appliance is back up and running again!

How to prevent further faults with your tumble dryer

To prevent your tumble dryer from developing faults in the future, you will need to give it a regular clean. Performing tasks such as removing lint, cleaning the condenser and emptying water regularly will keep your appliance in top condition and help you to save energy too. Take a look at our article on how to clean your tumble dryer for some great tips and advice.

Join our mailing list below to stay up to date with more information on fixing and maintaining your household appliances as well as discounts and new products too.

Print Article Print this article